Multi Stations Automatic Rotor Aluminum Die-Casting Filling Machine

Specification:

Max. mold closing stroke:150mm
Pressing injection stroke: 50mm
Hydraulic system working pressure: 10~25MPa
Hydraulic motor power: 7.5kw
Oil tank capacity: 350L
Power: 380V 50Hz
Rotor stack length: 16-100mm
Rotor OD: 40-100mm
Pitch time ≤18~24s
Change-over time: 20mins
Upper Presser operation pressure: 40T
Bottom presser operation pressure: 15T
Machine weight: 3200kg
 
Machine features:
Automatic get aluminium melt liquid, automatic loading and unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up.
Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.
Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can be set.
There is water cooling channel, helpful for reducing the mold temperature effectively.
Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.
Machine will alarm and stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.
 
Rotor sample after die casting

 

Specification:

Max. mold closing stroke:150mm
Pressing injection stroke: 50mm
Hydraulic system working pressure: 10~25MPa
Hydraulic motor power: 7.5kw
Oil tank capacity: 350L
Power: 380V 50Hz
Rotor stack length: 16-100mm
Rotor OD: 40-100mm
Pitch time ≤18~24s
Change-over time: 20mins
Upper Presser operation pressure: 40T
Bottom presser operation pressure: 15T
Machine weight: 3200kg
 
Machine features:
Automatic get aluminium melt liquid, automatic loading and unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up.
Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.
Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can be set.
There is water cooling channel, helpful for reducing the mold temperature effectively.
Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.
Machine will alarm and stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.
 
Rotor sample after die casting

 

• Used in hydraulic system.

• Filter media is Complex Fiber.Resin-Impregnated Paper.Stainless

  Steel Sintered Metal Mesh,control cleanliness effectively.

• First bubble point per ISO2942.

• Flow resistance per ISO3968.

• Retained capacity and Filter efficiency per ISO16889.

• Mass filtration precision for choose.

• The size can make to order according to the customer's demand

Hydraulic Filter Element Series

Filter Element ,Filter Element In Servo System,Servo System Filter Element,Servo Valve Filter Element

XINXIANG PINGYUAN AVIATION HYDRAULIC EQUIPMENTS CO.,LTD , https://www.coupling.pl