E-ONENESS goal is to offer not only competitively prices quality pneumatic actuators but as well to assist our customers with service and know-how. This also includes adaptation solutions, switch boxes, solenoid valves and manual override gear boxes to meet our customer requirements.
The products and services of E-ONENESS will continuously be adapted to the requirements of the customers and the market and shall always be associated with quality.Yesun series Rack & Pinion Design Pneumatic Actuator:
Yesun series Rack & Pinion Design Pneumatic Actuator:
16 models, The max. Output torque 3, 920Nm at 6 bar air supply. ISO5211/DIN3337 to match valve connection, Namur interface for the accessories. + 5° Stroke adjustment. Hard anodized treatment on actuator body and piston, over 200um epoxy coated on end caps which meet ASTM B117 qualification.
No. | Description | Qty | Standards Material | Protection | Optional Material |
1 | Indicator screw | 1 | Plastic(ABS) | Â | Â |
2 | Indicator | 1 | Plastic(ABS) | Â | Â |
3 | Spring clip | 1 | Stainless steel(304) | Â | Â |
4 | Metal washer | 1 | Stainless steel(304) | Â | Â |
5 | Outside washer | 1 | polyoxymethylene | Â | Â |
6 | Body | 1 | Extruded aluminum alloy | Hard anodized etc | Â |
(6005-T5) | |||||
7 | O-ring(pinion top) | 1 | NBR | Â | Viton/silicone |
8 | Bearing(pinion top) | 1 | polyoxymethylene | Â | Â |
9 | Inside washer | 1 | polyoxymethylene | Â | Â |
10 | Travel stop | 1 | Alloy steel(45#) | Â | Â |
11 | Pinion | 1 | Alloy steel(45#) | Nickel plated | Stainless steel |
12 | Bearing (pinion bottom) | 1 | NBR | Â | Viton/silicone |
13 | O-ring(pinion bottom) | 1 | polyoxymethylene | Â | Â |
14 | Hole sealant | 2 | NBR | Â | Viton/silicone |
15 | O-ring(adjust screw) | 2 | NBR | Â | Viton/silicone |
17 | Nut (adjust screw) | 2 | Stainless steel(304) | Â | Â |
18 | Adjust screw | 2 | Stainless steel(304) | Â | Â |
19 | Piston | 2 | Die-Cast aluminum(101A) | Anodized/zinc galvanized | Stainless steel |
20 | Plate(piston) | 2 | polyoxymethylene | Â | Â |
21 | Bearing (piston) | 2 | polyoxymethylene | Â | Â |
22 | O-ring(piston) | 2 | NBR | Â | Viton/silicone |
23 | Spring | 0~12 | Spring steel | Dip coating | Â |
24 | O-ring(end cap) | 2 | NBR | Â | Viton/silicone |
25 | End cap | 2 | Die-Cast aluminum(ADC12) | Powder polyester painted etc | Â |
26 | Cap screw | 8 | Stainless steel(304) | Â | Â |
27 | Stop screw | 2 | Stainless steel(304) | Â | Â |
28 | Nut (stop screw) | 2 | Stainless steel(304) | Â | Â |
E-ONENESS goal is to offer not only competitively prices quality pneumatic actuators but as well to assist our customers with service and know-how. This also includes adaptation solutions, switch boxes, solenoid valves and manual override gear boxes to meet our customer requirements.
The products and services of E-ONENESS will continuously be adapted to the requirements of the customers and the market and shall always be associated with quality.Yesun series Rack & Pinion Design Pneumatic Actuator:
Yesun series Rack & Pinion Design Pneumatic Actuator:
16 models, The max. Output torque 3, 920Nm at 6 bar air supply. ISO5211/DIN3337 to match valve connection, Namur interface for the accessories. + 5° Stroke adjustment. Hard anodized treatment on actuator body and piston, over 200um epoxy coated on end caps which meet ASTM B117 qualification.
No. | Description | Qty | Standards Material | Protection | Optional Material |
1 | Indicator screw | 1 | Plastic(ABS) | Â | Â |
2 | Indicator | 1 | Plastic(ABS) | Â | Â |
3 | Spring clip | 1 | Stainless steel(304) | Â | Â |
4 | Metal washer | 1 | Stainless steel(304) | Â | Â |
5 | Outside washer | 1 | polyoxymethylene | Â | Â |
6 | Body | 1 | Extruded aluminum alloy | Hard anodized etc | Â |
(6005-T5) | |||||
7 | O-ring(pinion top) | 1 | NBR | Â | Viton/silicone |
8 | Bearing(pinion top) | 1 | polyoxymethylene | Â | Â |
9 | Inside washer | 1 | polyoxymethylene | Â | Â |
10 | Travel stop | 1 | Alloy steel(45#) | Â | Â |
11 | Pinion | 1 | Alloy steel(45#) | Nickel plated | Stainless steel |
12 | Bearing (pinion bottom) | 1 | NBR | Â | Viton/silicone |
13 | O-ring(pinion bottom) | 1 | polyoxymethylene | Â | Â |
14 | Hole sealant | 2 | NBR | Â | Viton/silicone |
15 | O-ring(adjust screw) | 2 | NBR | Â | Viton/silicone |
17 | Nut (adjust screw) | 2 | Stainless steel(304) | Â | Â |
18 | Adjust screw | 2 | Stainless steel(304) | Â | Â |
19 | Piston | 2 | Die-Cast aluminum(101A) | Anodized/zinc galvanized | Stainless steel |
20 | Plate(piston) | 2 | polyoxymethylene | Â | Â |
21 | Bearing (piston) | 2 | polyoxymethylene | Â | Â |
22 | O-ring(piston) | 2 | NBR | Â | Viton/silicone |
23 | Spring | 0~12 | Spring steel | Dip coating | Â |
24 | O-ring(end cap) | 2 | NBR | Â | Viton/silicone |
25 | End cap | 2 | Die-Cast aluminum(ADC12) | Powder polyester painted etc | Â |
26 | Cap screw | 8 | Stainless steel(304) | Â | Â |
27 | Stop screw | 2 | Stainless steel(304) | Â | Â |
28 | Nut (stop screw) | 2 | Stainless steel(304) | Â | Â |
Speaking of a 26 inch bicycle, I'm sure everyone is familiar with it. The bicycle I'm introducing today is a bicycle independently developed, designed, and produced by our company. This Lithium Battery Electric Bicycle is different from a regular bicycle. This Electric Bike is equipped with an Ebike Motor and a Lithium battery. Some mopeds are equipped with rear wheel hub motors, some are mid mounted Ebike Motors, and very few are front wheel hub motors. Lithium Batteries are installed in the lower tube position of the moped to provide a continuous source of power and energy support for the lithium-ion E Bike.The method of dividing the size of a car varies from person to person. Here, 26 inches refer to the wheels of a lithium-ion bicycle and not the frame. If the size is divided according to the bicycle frame, it can be divided into 15 inches and 17 inches.The method of dividing the size of a Bicycle varies from person to person. Here, 26 inches refer to the wheels of a lithium-ion Electric Bicycle and not the Bike Frame. If the size is divided according to the Bicycle Frame, it can be divided into 15 inches and 17 inches. The most important frame part of a bicycle is the frame, which directly affects the classification criteria and size of an Ebike. Most frames are also patented products by designers, which directly affects the appearance and audience of the Bike.
City Electric Bike , City Ebike , Small Size Bike
Ejoysport Technology (SuZhou)Co.,LTD , https://www.toperiding.com