60Hz Googol Natural Gas Diesel Fuel Dual Engine for Generator 320kw-1800kw

60Hz Googol Natural Gas Diesel Fuel Dual Engine for Generator 260kW-1560kW


Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.


Applied gas:

Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc

Acceptable fuel gas pressure: 5~12kPa

CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%

Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.

Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )

H2S content≤ 200mg/Nm³

NH3 content≤ 20mg/Nm³

Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M

Water content≤ 40g/Nm³ , no free water.


Acceptable working conditions:

Ambient temperature: -10° C~+40° C

(antifreeze or preheater needed for below 0° C)

Relative humidity: <90%(20° C)

Altitude: ≤ 1000m

Normal working conditions:

Genset can run at rated power on the conditions:

Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.

Standard scope of supply:
1, Gas Engine

2, AC Generator

3, Common Frame

4, Control Panel

5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug

6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor

7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic

8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body

9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor

10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve

11, Exhaust Bellows & Muffler

12, Radiator for optional

Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.

60Hz Googol Natural Gas Diesel Fuel Dual Engine for Generator 260kW-1560kW


Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.


Applied gas:

Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc

Acceptable fuel gas pressure: 5~12kPa

CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%

Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.

Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )

H2S content≤ 200mg/Nm³

NH3 content≤ 20mg/Nm³

Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M

Water content≤ 40g/Nm³ , no free water.


Acceptable working conditions:

Ambient temperature: -10° C~+40° C

(antifreeze or preheater needed for below 0° C)

Relative humidity: <90%(20° C)

Altitude: ≤ 1000m

Normal working conditions:

Genset can run at rated power on the conditions:

Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.

Standard scope of supply:
1, Gas Engine

2, AC Generator

3, Common Frame

4, Control Panel

5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug

6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor

7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic

8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body

9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor

10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve

11, Exhaust Bellows & Muffler

12, Radiator for optional

Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.

Ultrasonic Laminate Machine For Filter

Ultrasonic Laminate Machine for filter, has many kinds of calling methods in the industry, such as ultrasonic automobile filter material compound machine, ultrasonic air conditioning filter material laminating machine and so on. The working principle is to use the high frequency vibration wave to transmit to two or more welding material surface, in the case of pressure, the material surface friction to form the fusion of the molecular layer and the advantage is that the fast energy saving melts the high conductivity of high conductivit. We have many years of experience in producing Ultrasonic Laminating Machine, and export a lot of countries, which are well received by customers. Welcome to contact us for more detail information.

Advantages of the ultrasonic laminate machine for filter

1.Short welding time, ultrasonic automatic bonding without thread and needle, more efficient and convenience, the sewing speed is more than 5 to 10 times compare with traditional way. the width of ultrasonic laminating machine is decided by client.

2. Because of needleless, so that it can avoid leaving the needle inside of the product, eliminating the security risks, It`s a new safety and environmental friendly product.
3. Comparing with traditional way, ultrasonic laminating is more cementation, clear embossed surface, has a more three-dimensional relief effect, more high-class and beautiful.
4. After Pinhole-free processing, it is waterproof and more warm.
5. Using roller die, easy to change, and can sew many kinds of designs. and can make any design according to client`s request.
6.This machine is fully automatic, equipped with infrared

FAQ

Q: Are you a factory or trading company?
A: We are a factory which license of import & export.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in dongguan City, Guangdong Province which is near Shenzhen. Welcome to visit us!
Q: How can we know the quality of your machine?
A: Customers can send material to us and then we use our machine to manufacture finished products which will be re-sent to customers.
Q: How to buy your machine?
A: Please send me inquiry to our email, when we reach a agreement, we will sign a contract to confirm our order.
Q: Roller & Pattern type?
A: We make kinds of rollers according to customers' requirements.
Q: Are we still need to install the machine after we got?
A: We will adjust the machine before we deliver to you, also we will send you video and manual to teach you how to use the machine.
Q: What about your warranty?
A: Our warranty is 1 years

Ultrasonic Laminate Machine For Filter

Ultrasonic Laminate Machine For Filter,Ultrsonic Embossing Pressing Machine,Ultrasonic Laminated Machine,Ultrasonic Fabric Embossing Machine

JIEDA Utrasonic Equipment Techonolgy Co.,Ltd , http://www.jiedamachine.com