![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
With the rapid increase in the use of vacuum circuit breakers, the vacuum circuit breaker failure rate has also increased. According to the statistics of the state of the power system switchgear, the ratio of breaking and closing of vacuum circuit breakers is relatively high compared to other types of circuit breakers. The problem is mainly in the arc extinguishers, and the leakage of the arc extinguishers and the lack of vacuum are the main factors. the reason. In vacuum circuit breaker components, the vacuum interrupter is a non-repairable component, and the arc extinguishing chamber is broken and can only be replaced as a whole. In order to ensure the safe and reliable operation of the vacuum circuit breaker, it is necessary to attach great importance to the judgment and determination of the vacuum degree of the vacuum interrupter.
(1) Strictly control the selection of vacuum circuit breakers, vacuum interrupters, and plant selection. Selecting a stable, reliable product is the basis for improving the operational reliability of vacuum circuit breakers.
(2) Some routine detection methods, such as observation method, AC voltage withstand method, spark meter method, etc., are the most basic methods for qualitative testing of vacuum degree, and in particular, AC voltage withstand method is a regular inspection method stipulated by regulations of the electric power department. The circuit breaker user must carry out the inspection work according to the regulations.
(3) For users who use a large number of vacuum circuit breakers, they should use a reliable vacuum tester to test the vacuum degree. At present, some regional, provincial, and municipal electric power companies such as North China Electric Power Group Corporation, Jiangsu Provincial Electric Power Corporation, and Sichuan Provincial Electric Power Company have all clearly required or actively promoted the vacuum of arc extinguishers for vacuum circuit breakers in their respective high voltage switch professional work. Degree test.
(4) When purchasing home-made vacuum testing instruments, it is necessary to select the products whose performance and quality meet the requirements of users, so as to avoid the negative influence caused by the misjudgment of vacuum degree. For the vacuum degree determination work, a corresponding management method shall be established and the vacuum test shall be conducted under the following conditions: before the new equipment is put into operation; after the specified maintenance pre-test working period; after the vacuum circuit breaker has opened the specified number of fault currents; After the specified number of breaking load currents and mechanical life; when abnormal conditions are found during operation. When the vacuum degree does not meet the requirements, the vacuum arc extinguish chamber should be replaced in time when it is lower than or close to 6.6×10-2 Pa. For a vacuum interrupter whose vacuum degree is greatly reduced but still within the acceptable range, The test cycle should be appropriately shortened, combined with previous measurement data analysis to determine the downward trend in vacuum, and it is determined whether the vacuum interrupter continues to operate.
(5) For spare parts of vacuum arc extinguishers purchased, vacuum test shall be conducted before the products are put into storage and use to prevent unqualified vacuum interrupters from being put into operation.
We have got CE certificate from 2015. We make can manufacture various types of high mast with lifting system for stadium highway parking lot and etc.
Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.
Steel Lighting Pole High Mast,30m High Mast Pole, High Mast pole for stadium
Jiangsu Xinjinlei Steel Industry Co., Ltd. , http://www.steel-pole.com