![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
This hex flange head self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.Stainless Steel 410 is harder than stainless 18-8/304 or 316, very ideal choice for metal sheet, structure steel etc.Â
Hex head self drilling sheet metal screws are installed with a wrench or hex nut setter. Ruspert Plated can reach salt test 1000 hours, greatly improved the anti-rust and corrosionperformance.Â
Neoprene Washer can create a seal that withstands liquid and gas pressure.
Specification
Â
| Type | Self-drilling Screw /Tek Screw /Â Roof Screw |
| Grade | SUS410(Martensite), Hardened |
| Head Type | Flange  Head |
| Drive Type | Exterior Hex |
| Thread Type | AB |
| Point Type | #2 Tek Point |
| Diameter | #8 ~Â 1/4", 4.2 ~Â 6.3mm |
| Length | 1/2" ~Â 10", 13~ 250mm |
| Standard | DIN, ANSI, JIS, IFI |
| Stock | Unavailable |
Contact
If you're insterested in our stainless steel 410 hex washer hex flange head self-drilling roofing screw with bonded washer, please do not hesitate to send us an email or call us at +8615867456779(Mobile)directly.
For stock, we suggest you double check from us before placing order, thank you!
410 Stainless Stee Hex Flange Head Self-drilling Metal Screw with Neoprene WasherThis hex flange head self-drilling screws are made of stainless steel and have a sheet metal thread with a self-drilling cutting  point to pierce through metal steel, aluminium, wood etc., including structural steel.Stainless Steel 410 is harder than stainless 18-8/304 or 316, very ideal choice for metal sheet, structure steel etc.Â
Hex head self drilling sheet metal screws are installed with a wrench or hex nut setter. Ruspert Plated can reach salt test 1000 hours, greatly improved the anti-rust and corrosionperformance.Â
Neoprene Washer can create a seal that withstands liquid and gas pressure.
Specification
Â
| Type | Self-drilling Screw /Tek Screw /Â Roof Screw |
| Grade | SUS410(Martensite), Hardened |
| Head Type | Flange  Head |
| Drive Type | Exterior Hex |
| Thread Type | AB |
| Point Type | #2 Tek Point |
| Diameter | #8 ~Â 1/4", 4.2 ~Â 6.3mm |
| Length | 1/2" ~Â 10", 13~ 250mm |
| Standard | DIN, ANSI, JIS, IFI |
| Stock | Unavailable |
Contact
If you're insterested in our stainless steel 410 hex washer hex flange head self-drilling roofing screw with bonded washer, please do not hesitate to send us an email or call us at +8615867456779(Mobile)directly.
For stock, we suggest you double check from us before placing order, thank you!
YRT turntable bearing is a rotary mechanism with outer ring rotation and inner ring support. It is mainly divided into three series: YRT type, YRTS type and YRTM type. The three series bearings have the same installation dimension, the internal structure is different, and the performance is similar. YRT series bearings consist of three rows of rollers, two rows of axial rollers ensure stable axial bearing capacity. A row of radial rollers ensure that the bearing can bear radial force and overturning moment, which is suitable for the slewing mechanism with axial load. YRT turntable bearings are mainly used for CNC machine manufacturing industry. As its core components, domestic YRT series bearings demand is also more dependent on imports. The accuracy parameters of domestic YRT turntable bearings are also based on international manufacturers. Since twenty-first Century, especially with the national high-end CNC machine tools and basic manufacturing equipment special start, greatly promoted the development of industry of machinery and equipment, machine tool development process of high speed and precision, complex, intelligent "has been further accelerated.
1.YRT type
The Yrt Bearing consists of a thrust / centripetal seat, a thrust / centripetal shaft ring, a thrust washer, two rolling pin cage assemblies and a group of centripetal cylindrical rollers. A screw hole for the installation of a seat ring and a shaft ring. This type of bearing has high axial and radial bearing capacity.
2.YRTS type (radial nylon maintainer)
The radial roller uses nylon retaining device to make the YRTS bearing have the characteristics of high limit speed and very low friction torque. Therefore, the bearing is suitable for engine with torque.
3.YRTM type (including steel grid measuring system)
YRTM is a two way thrust cylindrical roller YRT combined bearing equipped with steel grating ruler. It realizes real-time monitoring and adjusting the rotation accuracy of bidirectional thrust cylindrical roller combined bearing, so as to ensure the high accuracy operation of the machine.
YRT bearing bearing is suitable for axial and radial bearing mechanism. High tilt stiffness and high precision, suitable for rotary table, chuck and iron cutter head, and bearing configuration in measurement and experiment. This type of bearing is also required to match the equipment parts. When installing the required control installation screw tightening torque. It is mainly used in high precision field of high precision CNC turntable, indexing head, military radar, aviation, spaceflight and measurement and test.
Main model
YRT series (German INA/FAG company corresponding model) main model:
YRT50, YRT80, YRT100, YRT120, YRT150, YRT180, YRT200, YRT260, YRT325, YRT395, YRT460, YRT580, YRT260
YRTS series (German INA/FAG company corresponding model) main model:
YRTS200, YRTS260, YRTS325, YRTS395, YRTS460
YRTM series (German INA/FAG company corresponding model) main model:
YRTM150, YRTM180, YRTM200, YRTM260, YRTM325, YRTM395, YRTM460
Yrt Bearing
Yrt Bearing,Rotary Table Roller Bearing,Yrt Types Slewing Bearings,Rotary Table Slewing Bearing
LUOYANG AUTO BEARING CO.,LTD , http://www.lyautobearing.com