Maintenance and Maintenance of Metal Element Analysis Instruments

For the maintenance and maintenance of metal element analysis instruments, it is related to the instrument's soundness rate, use rate and accuracy of inspection. Once the metal element analysis instrument absorbs dust and dirt, it will not only affect the performance of the instrument, shorten the service life, but also directly affect the test results. Because the dust is mostly a small dust particle with an electrostatic charge, it floats in the air and moves with the air. When it meets, it adheres to it. Dust adheres to the moving parts of the stainless steel equipment and increases wear. There are dust on the electrical equipment. Severely, it can cause short circuit and leakage. Therefore, the instrument should be regularly maintained and cleaned. There are many ways to remove dust, mainly depending on the condition of the dust attached to the surface and the degree of dust attachment:

First, in the air in a dry shower, if there is less dust or the dust is not yet wet and forms a patch, use a dry cloth to wipe, a towel brush, and a soft brush to remove dust from the equipment; Dust can be used to clean the ear ball or ear syringe pump blowing dust, vacuum cleaner can also be used to dust; Diagonal, the dust in the seam can combine several methods to dust together.

Second, in the air Chao Nei, when the dust has formed a block, the dust should be wiped with a damp cloth, diagonal, cracks in the joint can be used to remove the sharp soft strips, and then wipe with a damp cloth, but The discolored surface of the instrument and equipment should not be wiped with a damp cloth. If the dust is not easy to clean, wipe with a cotton ball that is stained with alcohol or ether, or clean it.