Pirelli Wins 2016 Oscar Masi Industrial Innovation Award

Pirelli recently won the 2016 Oscar Masi Industrial Innovation Award from the Italian Institute of Industrial Research. This award is mainly focused on promoting innovative processes or products for intelligent production. Pirelli’s award-winning team of engineers led by Gianni Mancini and Vincenzo Boffa has been working on CVA tire visibility control projects for four years.

This project is an automated system for detecting and analyzing finished products using artificial vision and automation technology. The visual management of product quality is the most professional and repetitive process in the industrial production process. This is the reason that inspired Pirelli engineers to develop this project.

Until today, the quality monitoring of tire products is still performed manually. For the tires, each finished product needs to pass through the naked eye through the worker and carefully examine the inside and outside to ensure that no visible flaws are present. However, artificial quality monitoring has a series of drawbacks, including repeated operations, it is difficult to define problems, and it is slow to keep up with the rhythm of industrialized production.

The CVA tire visual control project utilizes artificial vision technology to automate the inspection process to replace the existing artificial tire quality monitoring. This advanced system incorporates automated mechanisms with higher resolution and faster response times. The computer system will make judgments by analyzing the collected tire data information through an accurate image vision system.

This project was born in Pirelli's R&D center, its laboratory in Milan, and also benefited from the university's scientific research strengths, including the Department of Computer Science and Engineering at the University of Bologna and the Department of Automation and Information Technology at the Polytechnic University of Turin.

Pirelli's Vice President and Chief Executive Officer Tronchai said: “This award has inspired Pirelli’s R&D personnel to continue to create more advanced solutions. At the same time, we will continue to work with universities and research institutions to promote innovation and achieve continuous development. ."

Supporting Equipment of Plating Line

Supporting equipment of plating line such as filter, rectifier,etc.

It includes: Rectifier system,DC conductive copper bar or cable, Filter system, Filter piping, Post-treatment dryer, Water chiller, Ultrasonic generator, Cooling water tower, Stainless steel heat preservation water tank (with level gauge and alarm) and horizontal water pump and piping system, Circulating pump and piping system between chiller and cooling tower, Secondary wiring of supporting equipment,Coarse regeneration device, Automatic dosing and conductivity meter.

In order to complete the electroplating process according to the process requirements, it is not enough to have a power supply and a plating tank, and there must be some auxiliary equipment to ensure the normal production of electroplating. Including heating or cooling equipment, cathode moving or stirring equipment, plating solution circulation or filtering equipment, and necessary accessories for plating tanks such as electrode rods, electrode wires, anodes and anode baskets, plating hangers, etc.

Supporting Equipment Of Plating Line,Electroplating Equipment,Filter Equipment In Plating Line,Rectifier Equipment Of Plating Line

Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com