Pm45, Peripheral Pump, Micro Vortex Pump, Clean Water Pump

Model NO.: PM45
Application: Clarified Water Pump, Clean Water
Industry: Water Pump
Media: Clean Water
Performance: High Pressure
Theory: Vortex Pump
Pumpbody: Cast Iron
Casing: Al.
Impeller: Brass
Motor Winding: Copper
Voltage: 110/127V/220V
Frq: 50Hz/60Hz
Hmax.: 35-60m
Qmax.: 35-60L/Min
Color: Any Color (Mix. Qty 100PCS)

CHIMPPUMPS 1.0HP home use silent clean water pump MADE IN CHINA

PUMP

  • Brass impeller with evenly arranged radial vanes
  • Antirust copper inserts prevent impeller's block when starting after the pump is unused for a long time.
  • Max. Liquid temperature: +35ºC
  • Max. Suction: 8m
  • Cast iron pump body and support

MOTOR

  • Motor with copper winding
  • Shaft: stainless steel welded with 45#/45# steel be electroplated
  • Insulation class: B or F
  • Protection class: IP X4
  • Max. Ambient temperature: +40ºC
  • Cooling: External ventilation

PUMP INSTALLATION AND APPLICATIONS

It can be used to transfer clear water or other liquids similar to water in physical and chemical properties. It is suitable for small living water supply, automatic water sprinkler system, small air conditioner system or supporting equipment etc.

 

EXPLOSIVE VIEW


Pm45, Peripheral Pump, Micro Vortex Pump, Clean Water Pump
NO. DESCRIPTION NO. DESCRIPTION NO. DESCRIPTION NO. DESCRIPTION
1 pump body 9 "O" ring 17 Rotor 25 Screw
2 "O" ring 10 Blot 18 Split ring 26 Terminal board
3 Charge plug 11 Pump support 19 Back cover 27 Capacitor
4 Impeller 12 Drops guard 20 Fan 28 Terminal box cover
5 Key 13 Bearing 21 Fan cover 29 Screw
6 Snap ring 14 Snap ring 22 Housing

7 Washer 15 Blot 23 Fairlead

8 Mechanical Seal 16 Wound stator 24 Cable presser

 

 

Pm45, Peripheral Pump, Micro Vortex Pump, Clean Water Pump
MODEL POWER MAX.FLOW MAX.HEAD MAX.SUCT INLET/OUTLET GW PACKING DIMENSION(MM)
kW HP (l/min) (M) (M) (inch) (kgs)
TQ60 0.37 0.5 35 35 8 1" X 1" 5.3 265X130X160
TQ70 0.55 0.75 50 45 8 1" X 1" 8.5 330X180X205
TQ80 0.75 1.0 60 50 8 1" X 1" 9.5 330X180X205
PM45 0.37 0.5 38 35 8 1" X 1" 5.8 265X144X155
PM50 0.75 1.0 50 60 8 1" X 1" 9.5 335X175X215

 

 

 


Pm45, Peripheral Pump, Micro Vortex Pump, Clean Water Pump

FAQ
 
Q: What is your MOQ of this item?
A: Our MOQ is a full 20ft container, first time cooperation, we accept trial order to check quality.
 
Q: Is it acceptable to make customers' own brand?
A: Sure, we can do OEM.
 
Q: What are your payment terms? 
A: 30% T/T deposit, 70% against documents, or L/C at sight.
 
Q: How long is your warranty?
A: One year!
 
Q: What is the delivery time?
A: 25-30 days after receiving your L/C or T/T deposit.
 
 
Contacting information:

TAIZHOU QIANTAO PUMPS CO.,LTD(CHIMP)
TEL: 0086-576-86330365
FAX: 0086-576-86334238
 
WEB: www.chimppumps.com



---------------------------------------------------------------------------------------------------------------------------------------


COMPANY INTRODUCTION:

Taizhou Qiantao Pumps Co., Ltd. is a modern enterprise with a combination of development, production, service. It is specialized in producing electric pump and motor with more than 50 series and H-Beam

H-shaped steel is an economical cross-section high-efficiency section with more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structural weight, and has been widely used.
H-shaped steel is a widely used profile in steel structure buildings today, and it has many differences compared with I-shaped steel. The first is the flange, and second, the inner surface of the flange has no inclination, and the upper and lower surfaces are parallel. The cross-sectional properties of H-beams are significantly better than traditional I-beams, channel steels and angle steels.
The two outer and inner sides of the H-shaped steel have no slope and are straight. This makes the welding and splicing of H-beams easier than I-beams, and has better mechanical properties per unit weight, which can save a lot of materials and construction time. The section of the I-Beam is well subjected to vertical pressure and resistant to tension, but the section size cannot resist torsion because the wing plate is too narrow. H steel is the opposite, both have their own advantages and disadvantages.

H Beam,Section Steel,Shaped Steel

Tianjin YF Steel Co., Ltd , https://www.youfametal.com

Posted on