![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The external clamp type ultrasonic flowmeter is easy to use and widely used by users. However, due to improper installation or improper debugging, the phenomenon of inaccurate reading of the flowmeter occurs from time to time. How do we perform self-inspection under normal circumstances?
1. Due to paint outside the pipe, rust is not removed. Remove the pipe again and install the sensor.
2. The uneven surface of the pipe or the ultrasonic flowmeter is installed at the welding seam. The solution to this situation: The pipe is abraded or away from the weld.
3. The roundness of the pipe is not good, the inner surface is not smooth, and there is a pipe-type structure. This may happen if the pipe is a cast iron pipe. Solution: Select a place where the inner surface of the pipe is smooth or where the inner lining is located.
4. Measured medium is pure or suspended solution is too low solution: use other types of suitable instruments.
5. The glass fibers should be removed when the sensor is installed in the glass fiber pipe.
6. The sensor is mounted on the sleeve and weakens the ultrasonic signal. The sensor should be moved to the unsleeved pipe section.
7. The coupling between the sensor and the pipeline is not good, there will be gaps or bubbles in the coupling surface. The couplant should be reinstalled.
The above situation is based on the premise that the sensor is good, the flow rate is low or there is no flow rate, the sensor is damaged or there is no electricity or other reasons are different, please contact the company for details.
This article is provided by Jiangsu Detu Instrument Co., Ltd. , please indicate the source! !
Corn flour mill uses dry corn deskin and embryo removal technology, and the rate of leather embryo removal is relatively high. At present, China has the least occupied area, the highest degree of automation, the least investment and the most extensive processing equipment.
The corn flour mill separates the peeling system and the beating system, and uses one power to drive the two machines into one. It can avoid corn husk mixed with corn bran, save manpower, space, equipment investment, and convenient operation.Corn flour mill can process corn, such as cleaning, peeling, removing embryos, removing roots, removing black umbilicus, crushing, picking, grading, polishing and selecting. It is suitable for small processing households to be used for external processing.
If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Corn Flour Machine,Corn Pulverizer Equipment,Corn Milling Machine, Corn Flour Milling Machine
Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com