How to maintain and maintain the slurry pump

Slurry pumps are just like human beings. They also need careful care and management. How do you make your own slurry pump "permanently young" and work better? Routine maintenance is the key. Here's how to maintain the slurry pump:

1 The bearing pressure and water quantity should meet the regulations, and the tightness of the packing should be adjusted (or replaced) at any time. Do not cause shaft seal leakage. And timely replacement sleeve.

2 When replacing the bearing, be sure to ensure that the bearing assembly is free from dust and the lubricant is clean. When the pump is running, the bearing temperature is generally not to exceed 60-650C, and the maximum is not more than 750C.

3 To ensure the coaxiality of the motor and the pump, ensure that the elastic pad in the coupling is complete and correct, and replace it in time after damage.

4 Ensure that the pump assembly and piping system are installed correctly and firmly and reliably.

The 5 part slurry pump parts are consumables. Attention should be paid to the wear and tear of the wearing parts during daily use, and repair or replacement should be performed in time.

6 The suction piping system of the slurry pump must be free of air leakage. At the same time, attention should be paid to whether the suction inlet is blocked during operation.