Magnetic pump six maintenance instructions

1, 1000 hours after the normal operation of the magnetic pump should be dismantled bearings and face ring wear and tear, and replace the consumable parts should not be reused

2, the pump in use should be less than 40 ℃ ambient temperature, the motor temperature rise must not exceed 75 ℃.

3, conveying medium and its temperature should be within the allowable range of magnetic pump. Engineering plastics pump temperature <60 ℃, metal pump temperature <100 ℃, conveying suction pressure is not more than 0.2MPa, maximum working pressure 1.6MPa, density not more than 1600Kg / m3, viscosity not more than 30X10-6m2 / S Of hard particles and fiber-free liquids.

4, the transmission medium, if it contains solid particles, pump inlet to add filter: If containing ferromagnetic particles, the need to add magnetic filters.

5, such as the transmission fluid is easy to precipitate crystallization of the media, after use should be promptly cleaned, drain the pump effusion.

6, magnetic pump bearing cooling and lubrication is dependent on the transport medium, it is absolutely forbidden air to run; also should pay attention to the pump in the working process of a sudden power failure, and then start running time and space.
 
Magnetic pump (magnetic drive pump) mainly by the pump head, magnetic actuator (magnetic cylinder), motor, connecting the backplane and other parts of several components. Magnetic pump Magnetic drive by the outer rotor, the inner rotor and the non-magnetic isolation sleeve composition When the motor drives the outer rotor rotation, the magnetic field can penetrate the air gap and non-magnetic material, driven by the impeller with the inner rotor for Synchronous rotation, synchronous power transmission to achieve non-contact, easy to leak of the dynamic seal structure into zero leakage static seal structure.

HYG Series Rotating Barrel Dryer

HYG Series Rotating Barrel Dryer

Wet material is loaded from one head of the dryer, and then it is stirred by the bafflers that is uniformly distributed in the barrel. Material is uniformly distributed and dispersed in the dryer, fully contact the hot air of parallel (or counter) flow, so the drying process is expedited, and the impulsion power of media transfer is enhanced. During the drying process, material is under the effect of angled baffler and hot air, moves to the star shape unloader that is at the other head of the dryer. Applications: Applicable for drying big particles, heavy particles in chemical, mining, and metallurgy, such as mining area, cinder of blast furnace, coal, powder of metal, phosphate fertilizer and thiamine. For drying the powder or particles with special requirements, such as HP foaming blowing agent, residue of alcohol, light calcium carbonate, active clay, magnetic powder, graphite, and residue of medicine. For materials to be dried under low temperature and large lot continuous production. Features: The motorization level of the barrel is high, and the production capacity Is high. The resistance that the material passes through the barrel is less, and the power consumption is low. Application capability to different characters of materials is high. The operation is stable, the operation fee is low, and the uniformity of product drying is good.

Rotating Barrel Dryer,HYG Dryer,HYG Series Rotating Barrel Dryer

Changzhou Ruide Drying Engineering Technology Co., Ltd , https://www.rddryer.com