![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
As rural young and middle-aged laborers go out to work, there are phenomena such as “staying elderly†and “left-behind children†in rural areas, which brings tremendous pressure on rural public security. To control the security situation in rural areas, it is difficult to rely on a single police force and traditional means. It is necessary to rely on technical defense measures to establish a comprehensive prevention system led by technology prevention so as to adapt to the requirements of the "Peaceful Countryside" and new rural construction under the new situation. .
Compared with cities, the rural technology defense system is relatively single and its functions are not very powerful, but it also needs to be managed and used well. Therefore, it is necessary to strengthen and improve the level of technical protection in rural areas. The quality of life of peasants at the on-site stage has been greatly improved, and their own security needs have become more and more intense.
The user currently has such a demand. There are about 5 to 8 monitoring points in the village, which are mainly set in the main intersections of the village, village elementary school entrances, village cultural squares, etc. These images are aggregated to the village department for monitoring and Storage, at the same time, these images are transmitted wirelessly to the township government, and then transmitted by the township government to the county comprehensive management department using a wired network for unified management. At the same time, in order to enrich the amateur cultural life of the rural people, after transferring the Internet network in the town to the village, WIFI coverage is adopted so that the public can use modern intelligent terminals to connect to the Internet and learn about the rich network knowledge.
Since the monitoring points of rural monitoring systems are usually distributed on both sides of the road, or between relatively open fields, in many cases, residents are not willing to destroy their houses or fields for no reason. Even if they are only a little bit scared, they are not willing to. Damage to the appearance of your house or field, so the choice of installing cables is less desirable. The application of wireless monitoring equipment can achieve normal monitoring without laying cables. In addition, the monitoring points in rural areas are generally chosen to be installed on the street lights on both sides of the road. Then only the wireless transmission equipment and the wireless monitoring equipment are installed on the light poles, and they can be put into use immediately, which is convenient and time-saving. To sum up, the use of wireless devices for transmission has become the first choice in rural security construction. Our company has provided a complete set of wireless transmission solutions.
As shown below:
For the main monitoring points in rural areas, we can use our company's wireless equipment SF-5017CH for transmission. Some of them can be transmitted to the village department in a one-to-two way. Some of the more decentralized monitoring sites can be transmitted to the village monitoring center using wireless devices in a one-to-one fashion. Some remote monitoring sites can use a small part of the front end. After summarizing and summarizing, it is transmitted to the monitoring center of the village through one device, while the monitoring point of the village is wired to the monitoring center of the village.
After the monitoring points are all summarized, because the village is far away from the town government, we can use our company's long-distance large-bandwidth wireless equipment SF-5000MS series for transmission. After being transferred to the town government, it can be transmitted to the county using a wired network.
The second part is the part covered by WIFI. Our company's solution is to install three sets of our company's 2.4G wireless equipment SF-2414CH on the roof of the village building, using three 120-degree angle antennas, with the center of the village as the center. The village is covered by WIFI and there are suburbs covering more than 1km.
This article deals with product information, please click:
SF-5017CH: http://. . Com/aspcms/product/2016-3-10/334.html
SF-5000MS: http://. . Com/aspcms/product/2016-3-10/333.html
SF-2414CH: http://. . Com/aspcms/product/2016-2-24/330.html
If the appearance of the product is updated, please refer to the details!
Aluminum Die Casting Auto Parts
We are professional manufacture for Aluminum Die Casting For Auto Parts, Aluminium die casting for Communications, lamp part series, water pump part series, power tool series, radiator part series, Anti-Static Flooring products and other series products, we have factory in Ningbo Beilun.
Our automobile parts passed ISO9001 & ISO/TS 16949,we can provide auto parts for BMW,Benz,Audi,Toyota in high quality directly.
Our Advantages:
1) Experience in die casting for over 20 years and served customers all around the world.
2) More than 200 professional and hard working employees pursue a wonderful career.
3) International advanced-level equipment such as CNC, numerical lathes, furnace, welding equipment, CMM and detect &testing equipment we used to ensure our product's(Aluminium die casting for Auto parts) quality.
4) OEM service, you demand is our pursued.
5) ISO quality control
6) Standard: ASTM BS JIN DIN etc
7) Applied software for specification drawings: Pro/E, Auto CAD, Solid work, CAXA, UG. Etc.
We'll always create better Aluminum Die Casting for Auto parts, value-added services, to return new and old customers!If you want to find a top supplier in China, Welcome to visit our company!
Aluminum Die Casting For Auto Parts
Die Casting Accessories,Aluminum Die Casting Auto Parts,Engine Parts Aluminum Die Casting,Aluminum Die Casting Auto Gear Box Cover
Ningbo WEIBO Molding&Machine Co.,Ltd. , https://www.diecasting-manufacturers.com