·The "structural adjustment" characteristics of the imported automobile market in 2014

In 2014, China's imported auto market still showed structural adjustment characteristics, showing a pattern of further deepening adjustment in terms of brands, models, displacements and channels.
From the perspective of brand structure, the competitive landscape has changed, and the market share of American brands has increased significantly. From the perspective of country-specific brands, the European brand accounted for the largest share of the imported car market, but its share fell by 5.4 percentage points to 58.2%; the US brand share increased by 4.1 percentage points from 2013 to 16.7%, including Jeep and Cadillac. The continued hot sales of SUVs such as Ford are the main factors; the Japanese brand share has recovered slightly, and Infiniti, Acura and Lexus have grown to varying degrees. From the perspective of the growth rate of imports, Jeep, Mercedes-Benz, Land Rover, Toyota, and Subaru are growing rapidly.
From the perspective of vehicle structure, the market share of passenger vehicles is stable. From January to September 2014, the market share was 99.1%, an increase of 0.2 percentage points over 2013. SUV is still the absolute main model in the imported car market. In the first nine months of 2014, it imported 655,000 vehicles, a year-on-year increase of 29.3%, and the market share has remained above 60%. At the same time, the import volume of cars and MPVs also showed a medium-speed growth, with year-on-year growth of 22.8% and 17.5% respectively.
From the perspective of the displacement structure, the structure of the imported car continues to tilt toward a small displacement. Under the guidance of relevant national policies, under the guidance of relevant national policies, from January to September 2014, displacement models below 3.0L accounted for 91.6% of the total imported automobile market share, 2.3 percentage points higher than the 89.3% for the full year of 2013; The share of displacement models above 3.0L continued to decline, indicating that the downward trend of the displacement of imported cars was more obvious; the 1.5-2.0L displacement range became the first largest displacement range.
From the channel structure, the central and western markets maintained rapid growth, and the imported automobile market continued to develop in the central, southwestern and northwestern regions. From January to September 2014, the three regions accounted for 44.7% of the total imported car sales. The traditional market share in the eastern and northern regions continues to shrink. Among the major provinces and cities in the country, the highest growth rates are Chongqing, Henan, Sichuan, Xinjiang, Guangdong and Guizhou. Due to the restrictions on purchase restrictions, Tianjin 1-9 shares fell 22.5% year-on-year; Inner Mongolia fell 3.2.
In 2015, the new normal, new policies and new models will accelerate the diversification of the automobile circulation model. In terms of the new normal of China's economy, China's economy is still in the stage of “three-phase superposition” in which deep-seated contradictions are prominent and the economic growth rate shift period, structural adjustment pain period, and early stimulus policy digestive period. Under the new normal of economic operation, the state adheres to the general tone of steady progress, vigorously promotes reform, vigorously adjusts the structure, strives to benefit the people's livelihood, maintains stable economic operation, and improves the quality of economic growth. In terms of new policies in the automotive market, national industry policies and guidance have always guided the development of the automotive industry. After ten years of operation, the relevant departments have jointly issued a number of China's auto industry policies in 2014 in light of new developments in the industry. In 2015, a series of intricate policies will be introduced, and 2015 will be a new round of policy adjustment. The "first year" of the development of the automobile industry will be a crucial period for the new pattern of the automobile market and the reconstruction of new market rules in the next decade. In the new model of innovation market, the automobile industry has reached a critical period of transformation and upgrading. The adjustment of a series of industry policies will accelerate the diversified development of the automobile circulation industry. However, the interaction between technological innovation and market demand is the real promotion of imported automobiles. The source of market development. With the deepening reform of the auto industry, the deep adjustment of the auto market, the full market competition of multiple formats, the challenge of diversified sales and service models, facing new changes and developments, and facing more complex environments and competition, we not only While continuing to innovate existing brand licenses and future unlicensed business models, we are still thinking about and exploring new model innovations brought about by technological changes in the Internet and mobile Internet.
According to the report, under the new situation of China's imported auto market in 2015, the growth rate of the imported auto market will continue to fall, and the total demand for the whole year is expected to increase by about 10%. If the domestically produced models in the imported car market are released earlier than expected, the first single digit growth in the past five years may occur. From the perspective of the domestic market, China's automobile industry, as one of the pillar industries of the national economy, has experienced a rapid growth rate of 25% per annum during the period 2000-2010. It has gradually entered a period of steady growth since 2011, and is expected to increase in the future. The speed is 8-10%, and its main driving factors are the new demand in the third-fourth-line region and the demand for redemption in the first- and second-tier regions. It is estimated that the domestic automobile market will grow by 7%-8% in 2015, and the passenger vehicle market will grow by about 10%. From the perspective of new product supply, in the fourth quarter of 2014 and 2015, there will be more than 60 imported new cars entering the Chinese market, with cars accounting for 70%. The introduction of compact SUVs, high performance and coupe will continue to accelerate; The domestic production of imported products will continue to weaken.
The report suggests that China's imported auto industry faces new changes and developments. Facing the challenges of the new normal, new policies and new models, it cannot continue the previous single pursuit of high growth. It requires new ideas and promotion strategies and requires deep understanding. In order to grasp the policy, it is necessary to re-examine and adjust their respective strategies to adapt to the adjustment of industry policies and to meet the changes in the automobile market. In the face of complete market competition, it is necessary to further cultivate the brand authorization marketing system and enhance market competitiveness. In particular, some multinational auto companies should attach great importance to the over-network coverage in some regions, high inventory of all models, declining profitability, and the tension between upstream and downstream channels of channel dealers have reached critical points, actively balancing the relationship between manufacturers and jointly creating A good imported car ecosystem, and seek to work with brand authorized dealers to create a sustainable development path under the new pattern of the imported car market.

Machine Pictures:

 CL-80/100/80H-2000MM

  

CL-80/100/80H-1500MM

Featurers of Model CL-80/100/80H-1500mm

1.Strong Double Layer Vacuum Box Device 

Strong Double Layer Vacuum Box Device helps absorb the hot air between film and cooling roller,which makes the film be more closed and tightly to the cooling roller thus enhance the cooling effect when the machine is running in high speed. 

2. High Quality and Updated Advanced Cooling System

The cooling roller's diameter is 1000mm with bi-directional loop design and helix runner inside.The high-precision steel is adopted to ensure stable temperature on roller surface.

3.Melting Pump--Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.Installing the melt metering pump in the cast stretch film unit can make the machine produce constantly and efficiency. The pump can improve the product quality, stable the production process and decrease the energy consumption.

4.Four Air Shaft Roll Changers Device

One roll change takes only 30 seconds and this system can help produce small hand roll online when the machine is running in high speed.And so there is no need to install a Rewinding Machine to rewind,which helps save a lot of  time, cost and labor.

Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.

Installing the melt metering pump in the cast stretch film unit, which can keep the production constantly and efficiency. The pump can improve the product quality, stable the production and decrease the energy consume.

The housing is made of chromium-nickel alloy or nickel-base alloy, titanium alloy. The gear is made of quenching chromium steel, other metal materials are also applicable. Bearing is made of graphite NIAG, zirconium oxide or quench tool steel.

Advantages:

FAST AND STABLE FLOW SUPPLY

Eliminated the extruder`s pulsation wave. Improve the product quality, decrease the defective rate, and decrease the waste, which can save 2% material and 25% of the unit power consumption.

STABLE AND EFFICIENCY PRESSURE CONTROL

The melt pump can provide a stable pressure, which short the discharge time obviously and make the production effectively.

INCREASE THE EXTRUDER OUTPUT AND THE MACHINE LIFE

It has been found that after install the melt pump, the max pressure wave value is the pressure after pump. Which can make the inner pressure of the extruder decrease, the melt shear strength decrease, the temperature curve gently, and restrain the temperature rising. Also the melt pump can avoid the damage to the extruder from the high pressure.

Main Technical Specification of CL-80/100/80H-1500mm

(Such as  plastic film machinery.)

  (1) Overall Dimensions(L*W*H):    14m*6.5*4.45

     Max width of rewinding:     500mm*3

     Max Rewind Diameter:      Ã¸400mm

     Liner speed of machinery:   350m/min

  (2)Rewind the film by combining it`s surface and core to make the film roller tightly closed and level and smooth.

  (3)Remove the film roller and install the paper tube at the same time, which only takes about 25-30s and produce 2-3kg small film roller when the machine is running in high speed.

  (4)Automatic edge material recycling system with on-line vacuum makes the process of rewinding more smooth, increases the fracture resistance, and decreases the limitation by liner speed.

  (5)The recycling materials are extruded out from only and specific screw to stable the the extrusion system and to decrease the deviation about the weight of film.

  (6) The extrusion machine is driven by coupling which stables the extrusion process and therefore stables the film output from die head.

  (7)Prompt measurement to adjust the thickness and uniformity of the film easily. 

High Speed Stretch Film Machine

High Speed Stretch Film Machine,Automatic High Speed Stretch Film Machinery,High Speed Stretch Film Unit

CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , http://www.clxmachinery.com