Disc feeder

The disc feeder is an easy-to-adjust, accurate feeding and easy to automate operation. It is suitable for feeding equipment of fine-grained materials (below 20 mm). FIG 1 is an old-fashioned, are also used in the past disc feeder; FIG. 2 is a metered-disk Baoshan steel plant used feeder. The feeder and belt conveyor are driven by a set of drives and are provided with an electromagnetic clutch. The electromagnetic clutch not only realizes the start and stop of the feeder, but also has the capability conversion function. Figure 3 is a schematic view of the connection between the body of the quantitative disc feeder and the lower funnel of the silo, which is composed of a disc sleeve with a fan gate, a disc for receiving the pressure of the silo, a scraper plate and a material adjusting member. . The material is discharged from the discharge opening by means of a swivel of the disc. The belt speed of the measuring tape machine does not exceed 1 m / sec. The metering device is composed of a gantry, a first lever, a second lever, an underload elimination device, a brake, an overload protection device, an oil damper, a remote control balance device and a load cell.

Generator Chimney

Rainbow Commercial Exhaust System is used for boiler and generator in hotel, apartment, hospital, school and date center.

Double wall stainless steel pipe with high quality insulation and corrosion free stainless steel, no thermal bridges between the inner and outer tube.

This exhaust system is easy installation due to perfect fitting plug-in system, no welding on site needed.

Generator Chimney,Chimney Turbine Generator,Chimney Generator,Thermoelectric Generator Chimney

Suzhou Rainbow Environmental Equipment Co., Ltd , https://www.rainbowchimney.com

Posted on