![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
"There is almost no failure. There can be a lot of peace of mind on the road."
Song Shifu's car has been raised for more than three years now. His Fuman Auman has never been bad at halfway. During his use, he only went to the maintenance station for maintenance. The attendance rate of the vehicle is very high. In particular, the Foton Cummins engine was not only excellent in quality, but also had excellent performance. Moreover, it only needed maintenance once for 100,000 kilometers. The same mileage, other cars need to be maintained 4 times, which not only helped Song Master save a lot of maintenance costs, each time It also saves 3 days.
Very satisfied with Fu Tian Auman and Futian Cummins Engine Master Song
Master Song told reporters that the main reason for the low number of engine faults in Foton Cummins is that it uses lightweight, modular technology and reduces the parts department by 50%. Most of the engine failures are caused by the damage of wearing parts resulting in major machine failures. The modular design of the Foton Cummins engine greatly reduces the number of wearing parts and reduces the joints of parts, thereby significantly reducing the occurrence of failures. Frequency, to further improve the overall reliability of the engine.
"Driving is enough, always start with my brother."
Mentioned the car, Master Song special pride, whether it is starting or climbing, Auman GTL is always faster than other brands of cars, "Every time I set out together a few good brothers, I always the first one Reaching the destination, and thanks to its Foton Cummins engine.
According to report, the Futian Cummins heavy-duty engine has the characteristics of low speed and high torque, can reach the maximum torque at 1000 rpm, to provide a steady stream of power for the car, in addition, the engine also uses the IBrake engine cylinder brake technology, The vehicle provides a powerful braking force. Master Song told reporters that with iBrake-assisted braking, he significantly reduced the number of brakes on the road, greatly reducing the wear of the brakes and tires. The heavy trucks of other brands who had run the same line together had changed once. Tire, and his tires can run a few more times.
"The biggest advantage, ah, that is fuel-efficient."
Talking about the biggest advantage of "cars," Song Master said he did not hesitate to "economize fuel." With many years of experience, Master Song calculated an account for the reporter, from Pingdingshan to Handan, which is about 450 kilometers one way. Master Song’s car cost at least 100 kilometers away from the other cars on the same route to save 3 oils. Money will save nearly 30,000 yuan.
Asked about the secrets of fuel economy, Master Song told reporters that although drivers are aware of “lightly stepping on the gas pedal and braking less,†they do not do much. Therefore, the fuel consumption depends mainly on the performance of the engine. The engine adopts XPI 2000Bar ultra-high pressure injection, large intake valve and wide design of low speed and high torque range. In combination with Leakness pressure keeping technology, the engine is more precise in the control of the oil quantity, and the atomization is good, the combustion is more complete, and then the fuel is raised. effectiveness.
In the past three years, Futian Cummins ISG engine, with its superior quality and superior performance, has won the trust of Song Master and has become its “right hand and right armâ€, but also brought him no small gains. When asked about how to evaluate the Foton Cummins engine, Master Song said: "In short, the word 'stabilizes'"
Readings:PP/PE pipe extrusion production line
1. Diameter: 16-1200mm,
2. Output: 150-850kg/h,
3. Extrusion speed: 0.1-15m/min,
4. Installed power: 85-600kw
Process
material Hopper Dryer and Auto charger → PE pipe extruder → marking line extruder → Mould → Calibrator → vacuum calibration tank → spray cooling water tank → printer → haul-off → cutter → pipe discharging rack
Features
1. Equipped with single or Twin Screw Extruder, it can fulfill the need of processing PVC, PP, PE, ABS, PMMA et cetera.
2. 3-Dimension adjustable vacuum Calibrating Unit, optimized vacuun swith, flow switch, multiple choice of dies.
3. Optimized designed tooling, precise fabricated, high quality material.
4. Dynamic balance haul-off, frequency conversion/AC speeding, stable running, convenient operation.
5. Cutter adopts professional designed saw blade, controlled by PLC, smooth flat cut.
6. Optimized length counter and dust collector configuration.
Pe Pipe Making Machine,Pp Pipe Making Machine,Pe Pipe Manufacturing Machine,Pp Pipe Manufacturing Machine
KonRun Extrusion Machinery Technology (Ningbo) Co., Ltd. , https://www.konrunmachine.com